lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale
lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale__right
lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale_top
lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale__after
lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale__front
lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale__below

  • 【Superior performance】This plasma cutter features PRO technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught.
  • 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators.
  • 【Digital Display】DC output Digital LCD Display, Easy Read Front Panel Air-Pressure Guage, save energy and no noise, High cutting speed, Cutting smoothly and no polish demands.
  • 【Considerable & Safe design】Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection. Comes with wire and mask, which can prevent you from hurting while using.
  • 【Wide range of applications】Suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The cutting machine not only use in businesses and DIY users but also fully accommodating the demands of professional operators.

High Speed, Precision Plasma Cutting At A Low Cost

Strong Cutting Performance

This 240-volt plasma cutter also has a convenient digital display. Like all of our tools, our plasma cutters are engineered to provide reliable performance for the home or shop.

  • 1.8 times faster than a flame cutter.
  • Cut through 1/2-inch thick metals with ease.
  • Cut smoothly with no polish demands.
  • Perfect for commercial use or for DIY hobbyists.

Advanced Technology Plasma Torch Improves Cut Quality

Our Cut 50 Plasma Cutter is developed using the latest and most advanced technology. The unit features a compact design and carry handle for total portability and low system cost. This plasma cutter has a pilot arc-striking system that allows easy starts and gets a clean cut on electrically conductive materials such as steel, stainless steel, copper, aluminum, brass and more up to a 1/2 in. thick using standard household current without dross or slag. It’s like a hot knife through butter.

  • Continuous current regulation, high cutting speed & smooth cut finish.
  • Easy to use and cost-efficient performance to save money.
  • Good heat dissipation and long service life.
  • It has a digital display screen so you can view the data clearly.
  • Eco-efficient operation and low energy consumption.
  • Perfect for the processing of metal materials machinery.

Make short work of your metal cuts with this high-quality plasma cutter!


Simple Controls For Easy Operation

Easy dial 50 Amp max input current, adjustable output current with digital display and you can choose between 2.5 or 5-seconds of continuous air to blow through the torch after you stop cutting. The Super Deal CUT 50 Plasma Cutter was designed for ease of use and performance.


Enhanced Safety

The Super Deal CUT 50 Plasma Cutter features built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection and lack of compressed air pressure protection. The cooling fan efficiently dissipates excess heat for improved performance and safety.


Uses Standard Household Power

The Super Deal Cut 50 Plasma Cutter requires only standard household power for top notch performance using 110V. Does not need special or costly 220V hookups from utility company; you can plug in it at home, in the garage or in your workshop and you're ready to cut.

Top Performance In A Compact Size

Delivering excellent cutting performance in a lightweight but powerful inverter design of about 22.5lbs., it weighs less than the competition while matching or exceeding their performance.

Pilot Arc-Striking System

This plasma cutter has a pilot arc-striking system that allows easy starts and gets a clean cut every time without dross or slag. This extends the life of your tips by not requiring you to touch the work.

Specifications

Duty cycle: 60%, Efficiency: 85%, Load loss: 40W, Power factor: 0.93, Air pressure: 0.4Pa, Protection class: IP21, Rated input current: 24 A, Power supply voltage :110V/60Hz, Power supply capacity: 4.8KVA, Current range: 20-50A.

Complete Starter Set

Package includes LG-40 cutting torch, grounding clamp, 1 air regulator, 2 plasma tips, PG Head, 2 gas pipe claspers, 2 hoops, chipping hammer/ wire brush tool, welding face mask, pressure reducing valve and Owner's Manual.

Product information

    Additional Information

  • ASIN: B018XFZUA8
  • Customer Reviews: 4.5 out of 5 stars 532Reviews
  • Best Sellers Rank:
    #295,262 in Automotive (See Top 100 in Automotive)
    #359 in Plasma Cutting Equipment
  • Date First Available: December 4, 2015
Product Warranty: For warranty information about this product, please click here
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.

Product guides and documents

Application Guide (PDF)
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.

Related posts

Customer Questions

Sorry, we were unable to perform your search at this time.

There was a problem completing your request. Please try again later.

Don''t see the answer you''re looking for?

Your question might be answered by sellers, manufacturers, or customers who bought this product.

Please make sure that you are posting in the form of a question.

Please enter a question.

Q: How long is the power chord that is supplied?

A: mine was 36 inches, but I took it off and made my own power cord with quick connect from 1…

tim s. | 2 years ago

Q: what is the CFM air usage?

A: CFM (volume) is not related at all to PSI like the two answers here. Every compressor has…

Greg in Boulder | 3 years ago

Q: Kindly Reminder: this machine is not a pilot arc plasma cutter, it is a high frequency pla…

A: I have been confused about the meaning of "pilot arc", but for now, I am adopting the foll…

W35t0b | 2 years ago

Q: Does the cutter work that much better to invest in a 220v outlet?

A: Definitely it cost me about $40 to put in an outlet..
I can cut 3/8 plate like its butter

Gary Spain | 3 years ago

Customer reviews

4.5 out of 54.5 out of 5
532 global ratings

Reviews with videos

Reviews with images

Top reviews from the United States

jack of all trades
4.0 out of 5 starsVerified Purchase
Handy conversion table PSI to kfg/CM2 and MPa
Reviewed in the United States on January 23, 2018
Nice little unit; works great so far - be careful when replacing the cord (I added 10'' of 14 ga cord,) because it has 800 volts worth of capacitors inside. I picked up a PSI gauge at my welding shop to replace the gauge that came with it, but the NPT threads do not match... See more
Nice little unit; works great so far - be careful when replacing the cord (I added 10'' of 14 ga cord,) because it has 800 volts worth of capacitors inside. I picked up a PSI gauge at my welding shop to replace the gauge that came with it, but the NPT threads do not match the Chinese ones....So anyway, here''s a conversion chart I printed up and taped to the unit - Enjoy

PSI kgf/cm2 MPa
10 0.7 .07
20 1.4 .14
30 2.1 .21
40 2.8 .27
50 3.5 .34
60 4.2 .41
70 4.9 .48
80 5.6 .55
90 6.3 .62
88 people found this helpful
Helpful
Report
Rickcrew
5.0 out of 5 starsVerified Purchase
Worth 5 times every cent!
Reviewed in the United States on September 15, 2019
My expectations were low. I do a lot of fab work for my job and as a hobby. I have been building my shop up as I go and the next level was requiring a plasma cutter to get the more intricate shapes cut without spending hours cutting and shaping. I was anticipating spending... See more
My expectations were low. I do a lot of fab work for my job and as a hobby. I have been building my shop up as I go and the next level was requiring a plasma cutter to get the more intricate shapes cut without spending hours cutting and shaping. I was anticipating spending 1-1.5k on a “good” plasma cutter, and hadn’t decided to bite the bullet and buy one yet. I needed a tool that was going to last and be a dependable performer with moderate to heavy use. It had to have a small footprint and have the flexibility of running on 120/220VAC in case it had to go in the field.
For a little over $200 it seemed too good to be true. I read the reviews of people struggling with the regulator and the genius that burned two tips out on startup. I saw those reviews as the results of ignorance rather than quality concerns. 4.1 stars was still a fairly good rating considering this is a tool that requires background knowledge and technique to use correctly.
So for a little over $200 I figured “what the heck” I have wasted 200 on dumber stuff and never batted an eye.
The unit was packaged well and arrived in less than a week. All parts required were with the unit except for tubing for the regulator and a plug for the power lead. I am a field service technician for industrial air compressors so I had 1/4” tubing. A quick trip to Lowe’s for a ($15) 220v plug and I was wired for sound.
The regulator scaling was in PSI and BAR, so the complaints of the foreign scaling must have been addressed. (Tech tip: put a SMALL amount of silicone lube or WD-40 on the barb fitting before assembling regulator tubing). One of the reviews said 5/16” tubing, but that is not the correct size for the barb and will most likely leak.
I wired my machine for 220VAC to keep the amp draw lower on the incoming voltage wiring. I have several welders that have dual voltage setups and have the adapters to switch it to 120VAC if needed. 220VAC plugs are not any more complicated to set up than a 120VAC plugs. I have no idea why people freeze when it comes to 220VAC. I had a couple of 220VAC plugs in my garage already so it was pretty cut and dry.
I hooked up the air and plugged the work leads in. I plugged the machine into the outlet and hit the oversized illuminated power switch on the back. The fan fired up (wasn’t too loud) but you could tell it was moving a good flow of air into the unit keeping the inverter cool. I set the machine at 25A (50%) and the air pressure at 70psi to do a trial cut on some 1/8 cold roll steel.
The button on the torch was in a good location and had a silicone cover over it. This unit uses a pilot arc so touching your work isn’t necessary. Getting it close (1/8-1/4” away) will draw an arc.
The torch established quickly and sliced through the steel with ease (Tech Tip: Bare metals establish and maintain arcs better, so clean the cut area first). The unit features a 2.5s or 5s tip cooling after the cut is finished. I recommend the longer cycle to maintain your cutting tip.
So naturally the next step was to use a thicker metal. I used a 1/4” piece of stainless steel next. I set the machine at 36A and left the pressure the same. Again the machine performed reliably requiring a slightly slower travel to pierce steel twice the thickness as the first cut, but still far faster than using a saw or grinder.
Examining the cut area after the operation showed a clean cut with the typical amount of slag on the break through side. Using a guide rail will make the cuts laser straight and reduce slag build up, so for critical cuts take the time to plan it out and use guide rails. I off set the guide rail 1/8” from my cut mark and clamp it down. The speed at which you cut will also have a huge impact on the finish. Use scrap pieces to get the flow of how fast or slow you need to cut to get the required finish. I like the term “deliberate” to describe the motion. Zipping along too fast will leave spots that don’t completely cut through and dwelling too long will leave round divots in your line. If you get hung let go of the button, clear out what stopped your movement and start the cut from the end again. So many cuts get messed up from people trying to “pull” through a hang up.
I used the cutter for a project I had been putting off due to the number of complicated cuts I was going to have to make. I made about 30 or so cuts of varying shapes in the profiles of tools for a shadow board I was making. The machine performed flawlessly and was truly impressive. If I had the choice between this and a name brand I most likely would buy this again. The price point is excellent and the performance really couldn’t get any better, so why spend more?
45 people found this helpful
Helpful
Report
Glenn P.
1.0 out of 5 starsVerified Purchase
WOW! Plasma torch for $210?
Reviewed in the United States on August 25, 2018
Ever see something you want for a really low price and you think to yourself “this is too good to be true?” Well this holds true to that saying. Took a chance and ordered it. Opened it up and put it together and turned on the switch.. so far so good..... See more
Ever see something you want for a really low price and you think to yourself “this is too good to be true?”
Well this holds true to that saying.
Took a chance and ordered it.
Opened it up and put it together and turned on the switch.. so far so good..
Went to cut a piece of 10 gauge steel, pulled the trigger, it sputtered once and that was it. Wouldnt even spark by touching the tip to the steel. Took the torch head apart and the electrode welded itself to the shielding cup(not suppose to happen).
So it came with another electrode and shielding cup and installed them.
Tried to cut the same piece of steel.
Held a gap between the torch and the steel and pulled the trigger. Sputtered again, same thing. The electrode welded itself to the shielding cup.
Packed the stuff back in the box and contacted Amazon and they gave me a return authorization and I sent it back.
I give Amazon 5 stars for their service!
58 people found this helpful
Helpful
Report
Alex
4.0 out of 5 starsVerified Purchase
Honest review from an amateur
Reviewed in the United States on July 23, 2018
First impressions: much better build quality then I anticipated. Wasn’t expecting much at this price point but I am impressed. Installation was easy. Like everyone, I wished they provided a psi gauge and hose for the air compressor connection. I cut up an old braided... See more
First impressions: much better build quality then I anticipated. Wasn’t expecting much at this price point but I am impressed.
Installation was easy. Like everyone, I wished they provided a psi gauge and hose for the air compressor connection. I cut up an old braided showet head line. It works with minimal leaks.

Operation: sheet metal was a breeze. Faster then using any grinder. And relatively straight if you use a guide. I then attempted to cut 1/4 steel and it cut that too. It was a messy cut but I also wasn’t trying. Just wanted to see if the machine was capable. Apparently it is.

I wired the machine up to a 110v outlet and while I only made a couple test cuts, didn’t trip any breakers even when dialed up to 50amps. I am planning to eventually Install a 220v outlet to bring out the full capabilities of this machine but in all honestly, I’m not sure I’ll need it. Currently Using my small 3 gallon compressor. Mine kicked on often. If you plan on using it for extended periods of time, I’d invest in a minimum of a 25gallon tank or larger. For now, this will suffice for my DYI projects around the home.
For this price, I just don’t think you can go wrong. The next best option are the brand names at 3-4x the cost. Unless you plan using the cutter for work, this will be more then enough to handle most household projects. Good luck. Hope it lasts few years.
45 people found this helpful
Helpful
Report
F. DELEON
5.0 out of 5 starsVerified Purchase
CUT50 by Zeny - Excellent Value!
Reviewed in the United States on January 26, 2017
Important: do not be alarmed if you power-off the unit and it does not power-off, immediately! Wait 8-10 seconds before you do anything else... continue reading to understand why... The product received had improved features from the models I had researched and seen videos... See more
Important: do not be alarmed if you power-off the unit and it does not power-off, immediately! Wait 8-10 seconds before you do anything else... continue reading to understand why... The product received had improved features from the models I had researched and seen videos of, such as longer 7''-8'' heavy duty power cord (install your own plug), air pressure gauge externally installed on included pressure regulator (versus panel mounted susceptible to leaks per reviews), full-length heavy but pliable protective vinyl sleeve (versus light-duty denim) for the torch hose/control cable assembly, heavy-enough ground clamp (replaced the 8'' long ground cable with heavier 4 gauge wire) and an 8+ second delay before power-off when you push the rocker switch to the "off" position. I saw a video of someone power-off, -on, -off and -on in quick sequence, then the unit blew up...(understand now?).

I installed a NEMA L6-30P (30A locking) plug for 220VAC use, and made up a foot long NEMA "L6-30R"-to-"5-15P" pigtail for 110VAC use without having to change the plug. The machine works on both! Cuts deeper stock on 220V with higher available amperage settings.

The contact drag tips work great and I do not feel that the pilot arc feature is that necessary for the projects on my list. The smoothness of the surface on which the drag tip is in contact with will help determine the quality of the cuts but use of smooth-edge guides or templates is highly recommended instead of freehand for beginners. I prefer to have the side of the drag tip up against the guide because you can make more accurate cuts versus having the ceramic cup against a taller/thicker guide. For "pocket" cuts, you can "spark" a hole through with the drag tip in contact with the work piece... initially, hold at an angle away from you, then straighten up to vertical as soon as burn-through is achieved, otherwise, "gouging" of work piece will result, and continue with the required cut. If you need accuracy or cleaner start cut, drill a small pilot hole to start the pocket cut.

The 2.5 or 5 second airflow delay works and takes very little to get used to. You do not have to wait for the airflow to stop before continuing with a cut... not like the power switch thing... I have it set to 2.5 secs.

The included miniature (heheheh) pressure gauge (1/4" center mount) reads in bars/Pascals. I used a red marker to draw a line on the dial face for the equivalent PSI value. It will be replaced with a 2" or larger pressure gauge that reads in PSI.

The brass hose barb on the back of the unit to which you connect the air supply (post filter/regulator) is not 1/4", not 3/8" but something in between... metric 7 or 8. What a PITA! I ended up using two (2) layers of vinyl shrink tubing to make the 3/8" hose fit over it with just enough fit so that the hose clamp can be tightened sufficiently over it. I used a 90 degree elbow 1/4" FNPT-to-3/8" hose barb on the outlet of the filter/regulator to relieve the twisting forces on the outlet side of filter/regulator assembly.

Besides the 110V-220V power pigtail, I also made up a foot-and-a-half long air hose pigtail with an in-line dryer/dessicant filter (filled with blue indicated silica gel beads that turns pink when it needs to be replaced). It isn''t overkill. Very dry air is important for the ionization to occur without "pollutants" to generate clean plasma; besides, moisture laden air will damage the unit and consumables. The added benefit of this pigtail is it also relieves the twisting forces on the inlet side of the filter/regulator... the mounting bracket that bolts onto the back of the plasma cutter is not heavy gauge and bends easily, and the small filter/regulator body material is only die cast.

So far, the unit has performed flawlessly. I gave in and finally bought this plasma cutter when my 14" metal cutoff saw was just-too-small in capacity to cut 6" x 6" x 1/4" square tubing. The unit weighs less than 15 lbs and is very portable. It sits on the middle shelf of a converted medical equipment cart that holds a 220V MIG welder on top and a 220V arc welder on the bottom (all wired with L6-30P plugs) (Argon tank on the back). The only modification to the unit was installing an O-ring on the inside of the panel mounted control cable coax connector so that it protruded more from the front of the case to make it easier to thread the PITA nut of the torch assembly control cable.

I will update this review when something comes up that bears sharing...
99 people found this helpful
Helpful
Report
Prof100Top Contributor: Woodworking
5.0 out of 5 starsVerified Purchase
At $180 for CUT 50 plasma cutter it works great
Reviewed in the United States on August 28, 2020
PLASMA CUTTING OUT OF THE BOX: First piece cut was 1/4” hot roll bar. Cut the steel bar easily at the 40 amps setting like the proverbial hot knife through butter. Smooth clean cut. I use a straight edge or a template to... See more
PLASMA CUTTING OUT OF THE BOX:
First piece cut was 1/4” hot roll bar. Cut the steel bar easily at the 40 amps setting like the proverbial hot knife through butter. Smooth clean cut. I use a straight edge or a template to guide the torch. Free handing works too but unless you are blessed with a special talent the results look like it was free handed.

WARRANTY
1 year warranty but nothing local to USA. I added the 3 year Asurion warranty for $20.

WHAT IS WITH ALL THE NAMES FOR THE SAME MACHINE?
New name on the case. Not Zeny or Super Deal but F2C which stands for factory to consumer. I like the affordability and the functionality for a Entry level CUT50 plasma cutter. This is a high frequency start that means you position the torch tip on the clean cutting surface, pull the trigger then either drag the tip or raise it slightly off the surface after the arc is initiated and complete you metal cutting.

Consumable costs
This machine uses very low cost consumables to operate PT-31 torch. There are two different size tips available - regular and extended length. I prefer the extended length tip for its suitability to cut with a guide.

ASSEMBLY ADVICE
Use plenty of Teflon tape (not provided) to install the provided fittings. I used a quick disconnect fitting for the incoming air supply. Setup is easy but with no electric plug or hose you have to provide your own. So, you must provide the plug and a piece of pressure hose. A 5/16” Fuel hose was the final hose used to connector the air from the regulator to machine inlet. The provided hose clamps took care of holding this pressure line in place with up 100 psi.

WIRING THE PLUG
I installed a $12 220 volt plug to mate to my 220 volt single phase power line I have in my shop. Wire colors are non standard after you get past the green ground.
Ground is green.
Common black is the brown wire on the harness or cord
The white or hot is the blue colored wire on the supplied cord.

The pressure gage is labeled with psi. I find 60-70 psi or more creates the cleanest cuts. I use a 5 hp. Air compressor to supply air to the plasma cutter. It powers all my air tools.

KEEPING MOISTURE OUT OF THE AIR
I added a disposable in line filter filled with dessicant to trap moisture in the incoming compressed air.

HOW DOES IT INITIATE THE PLASA ARC?
Note, this is a high frequency start which means the torch tip must be brought to the bare metal to create the plasma arc then lifted slightly after the arc is started to preserve the tip or just drag the tip during the cutting. Dragging the tip is easiest way to cut but your tip lifespans is shortened. That said, consumables for this torch are reasonably priced.

Asurion 3 year warranty added at time of purchase. So, combined with 1 year factory it is warranted for 4 years.
8 people found this helpful
Helpful
Report
Tamra
4.0 out of 5 starsVerified Purchase
Very nice Plasma Cutter for the Price $
Reviewed in the United States on August 1, 2018
First impressions, this is a great plasma cutter for the price. This is a ZENY unit, same that is advertised less here on Amazon, but not PRIME. I have only used it with 220v so far. I was able to cut 1/8 steel plate and 1/4 iron stakes. I also cut 1/4" aluminum tube... See more
First impressions, this is a great plasma cutter for the price. This is a ZENY unit, same that is advertised less here on Amazon, but not PRIME. I have only used it with 220v so far. I was able to cut 1/8 steel plate and 1/4 iron stakes. I also cut 1/4" aluminum tube with it. The cuts are not beautiful but a lot of that is most likely my inexperience. This is much better than the 110v from Lotos I bought first and returned. Part of the problem may be the Chinese to English instructions which both the ZENY and LOTOS instructions suck. This unit has a HF (High Frequency) Pilot Arc (you do NOT need to touch the torch to the material to start cutting. Just get it within 1/16" to 1/8" away (closer the better) and push the button and the pilot arc will ignite the plasma arc to begin cutting. Keeping the tip from touching the material should make the consumables last longer, so far so good. I didn''t even try using the free welding mask that came with the unit and I plan to add a Desiccant Air Filter Dryer because moisture is an enemy of plasma cutting. I also plan to tighten several of the electrical spade terminals before I try to cut anything thicker than 1/4". I also bought the 2 year extended warranty. I will try it a few more times and if works as I hope I will update to 5 stars. Thank you.
15 people found this helpful
Helpful
Report
Kerry M. Clark
5.0 out of 5 starsVerified Purchase
Excellent machine
Reviewed in the United States on August 8, 2019
This Plasma Cutter is life changing! I train blacksmiths in Africa to make small crop threshers. These guys have limited tools to work with. Metal cutting is done with an angle grinder or even hammer and chisel. After having two women in a training in Uganda who weren’t... See more
This Plasma Cutter is life changing! I train blacksmiths in Africa to make small crop threshers. These guys have limited tools to work with. Metal cutting is done with an angle grinder or even hammer and chisel. After having two women in a training in Uganda who weren’t strong enough to handle the angle grinder we realized that we needed tools that would enable female participation. I was amazed to find this plasma cutter for such a low price. It actually costs less than these guys pay for angle grinders. And it is light and small enough that I was able to take it to Africa in my checked luggage. We have been using it all this week to build threshers in Rwanda. People who had never even seen an acetylene torch before took this out of the box and had it going in about ten minutes. It has been a godsend. This little cutter is a workhorse. It has run great and is easily cutting 6mm angle iron and 4 mm sheet metal. The trainees are making great cuts free handed. Several of them want one so we located it on Alibaba, who will ship to Africa. If I was entrepreneurial at all I would start a dealership for this plasma cutter in Africa, because at that price it is in reach for economically challenged small businesses and the market has zero competition. There are literally millions of people in Africa who would buy one of these if they were available. This thing is a workhorse. I’m buying two more ASAP to take to my fabrication trainers in Ghana. It did everything we needed and more.
11 people found this helpful
Helpful
Report
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.

Similar brands on Amazon

Sponsored
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale

lowest SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean sale Cut high quality (CUT 50) outlet online sale